Month: June 2006

Killer marshmallow gun

Killer marshmallow gun

Finally, a high powered PIC controlled marshmallow gun – “This device uses a PIC12F629 to create a burst of 30 high voltage pulses. The PIC activates a 1000 volt N-Chan FET driving a standard ignition coil. After the ignition, the PIC goes dormant until activated again. Most of the electronics, including the battery and momentary […]

Plant growing LEDS

Plant growing LEDS

BVnursery is using LEDS to grow plants…. “he target of the project is to develop an inexpensive, effective method of providing light to plants using only leds. This unit is designed to light standard horticultural starter trays measuing 10 x 20”. The logic follows several paths. Almost zero heat, almost zero waste due to proper […]

Emergency LED light

Emergency LED light

Utah Nature has a how to on making a LED emergency light – “This LED array uses 15 LEDs housed in a 1 inch PVC connector. Each LED has its own 100 ohm resistor to limit the current and reduce the voltage. The LEDs have a 20 degree light dispersion resulting in a beam much […]

Dual chambered air cannon

Dual chambered air cannon

Idioticgenius made a dual chambered air cannon, 90 psi and an interchangeable barrel – “I started this project when a friend of mine put a Shrader valve on a large rectangular assembly of glued PVC, or what he called an air cannon :-. He used a ball valve and a one inch SCH 40 barrel. […]

Wooden bike

Wooden bike

MAKE Flickr photo pool member Kenpower posted up this wooden bicycle from China “I snapped this wooden bike on a trip to Kashgar, China. It’s a bit heavy, but really works. Note the unconventional steering control!” [via] – Link.