
By Ryan Slaugh
Here it is, part 2 of the robot redo! ย In this video we finish the design and build the final robot. ย The video will show the highlights of the entire process. ย For a step through of all the software setup and code files go here. ย And for the connection diagram (schematic) go here.
The code included in the github files will get you controlling the robot from a website. Also included in the github link is a notes file. This has a step through of how everything was set up on the Pi and Arduinos in the project. ย It also contains some very helpful links.
This was a challenging project, but rewarding in the end. The power given by the Raspberry Pi in conjunction with the Arduino and A La Mode gives you great possibilities for adding sensors as well as programming in some automation.
If you have any questions, send me a note using the Contact Form. [contact-form subject=’Comment from Robot Redo Part 2′][contact-field label=’Name’ type=’name’ required=’1’/][contact-field label=’Email’ type=’email’ required=’1’/][contact-field label=’Website’ type=’url’/][contact-field label=’Comment’ type=’textarea’ required=’1’/][/contact-form]
See the full series here.
ADVERTISEMENT