Open Source Hardware Certifications for October 2026 

Open Source Technology
Open Source Hardware Certifications for October 2026 

The Open Source ardware Association (OSHWA) runs a free program that allows creators to certify that their hardware complies with the community definition of open source hardware. Whenever you see the certification logo, you know that the certified hardware meets this standard.

Currently the Certification database lists over 3472 individual certifications! In October we added 30 new certifications, from to and everything in between we were happy to have new and recurring names show up! Since October is Open Hardware Month and we especially encourage certification during it we are going to show you six certifications that we love and are pumpkin-spiced for OHM!

446MHz Tape Measure Yagi Antenna

IUD CA000080

Photo by Shreay Patel

The 446 MHz tape measure yagi antenna is a super rad, and very easy to make, antenna created for Amateur Radio Direction Finding! This build is so neat because it uses something so accessible for folks, the common tape measure. It actually has a very unique advantage too! Tape measures are highly directional for tacking, and they can safely fold and snap back into place when you’re out in the bush fox hunting.

Silicon Wafer Precision Scribing System

UID CN000030

Photo by Remi Rafael

Silicon Wafer Precision Scribing System works with the microelectronic devices made on silicon wafers. The process is usually done by photolithography before the wafer is cut to separate each device, using special saws to make it happen. This project is designed for a more precise cut at a low cost, and can be used on glass too!

NOX Spec-85A

UID PL000030

Photo by Norbert

NOX Spec-85A is a homemade digital night vision using a CRT viewfinder, CCTV or FPV camera, and a buck converter. A simple USB-C to DC-DC setup, and A/V out from camera to screen wiring set up brings it together. With a little bit of 3D printing, and consideration about whether you want to be able to mount the device on a helmet, you too can see in the dark.

Mighty Drive

UID LU000003

Photo by Michael Di Rocco

Mighty Drive is the newest board from Mighty Tronics! This board is a power interface for controlling up to four brushed FC pumps or comparable DC loads from an external microcontroller. Each channel accepts an independent PWM command and switches the load through a protected low-side MOSFET stage.

KTH5763 3D Hall-Effect Sensor

UID TR000012

Photo by Tan Siret Akinci

KTH5763 3D Hall-Effect Sensor from Riscfruit Laboratory is one of the many projects looking to lower the entry level to RISC-V based embedded hardware, RTL and software development. This project has been in development for a while and we’re really excited to see Riscfruit start releasing their projects! You can learn more about their work from Tan’s talk during our 24hr Membership Livestream.

Orbweaver

UID US002866

Photo by VESPID

Orbweaver is a Sub-GHz radio HAT+ for the Raspberry Pi 5. This radio allows you to set up your own wireless networks in the Sub-GHz license-free ISM band. It also allows for secure communication between Raspberry Pis, desktops, laptops, and Androids without reliance on existing communication infrastructure.

You can keep up with updates on all the latest certifications by following our certification bot on Mastodon mastodon.social/@oshwassociation or submit your project to be certified today at application.oshwa.org.

Tagged
Sid Drmay

a queer non-binary trans interdisciplinary artist who loves textiles, cyberpunk and snails. They work as the Community Coordinator for OSHWA, as well as Summit Fellowship Chair during OHS planning season. They are also co-chair of Dinacon and are a freelance journalist with bylines in CBC, This Magazine and Broken Pencil Magazine. They are a passionate arts educator and zinester. They are probably in the middle of too many projects right now.

View more articles by Sid Drmay
Discuss this article with the rest of the community on our Discord server!

ADVERTISEMENT