This python script runs on Linux and harvests system stats, creating graphs and assembling them in a page suitable for viewing on the PSP. It also dynamically reloads the images through Javascript, creating a smoother user experience. Tested with firmware 2.00 only. Link.
Home made, open source mp3 Player. The main goal of this project is to create an open design for a portable MP3 player, in both hardware and software. The secondary goal of this project is to make it as simple to construct, and as cheap, as possible. The design is based around the AVR Butterfly from Atmel. Photo and Link.
Master chip musician Gijs Gieskes has outdone himself this time: his second Walkman tape sequencer controls the Game Boy music cartridge LSDJ via various knobs and circuitry. In other words, the sequencer he built controls both a Walkman tape deck and a Game Boy. Check out this audio sample or this one to hear what all this sounds like. The effect is quite brilliant: a madcap tape deck scratch system with Game Boy music. Forget records and turntables. Tape is the future, man. Link.
…the Iceless Beer Box, an overly complex and undeniably superfluous solution to a minor problem. The importance of the coldness of beer has been well documented. The Internet community has witnessed prior attempts to tackle the lightly-pressing issue of quickly chilling beer below 0°C. Significant advances over previous work include the capacity to chill several bottles simultaneously and construction from widely available components. Link.
A series of photos (many photos) showing how to create a fake Ferrari out of an Acura NSX. The seem to have used a tiny toy car as the model for the whole project, excellent. Link.
With the application of a knife along the seam on the side and top of the device, the use of tweezers to hold the newly-formed gap open, the use of another pair of tweezers to reach in and grab the antenna, and the replacing of the rubber insulating plug on the side of the iTrip to seal the casing back up, I was able to fully extend the antenna out the side of the iTrip at a healthy 90º angle with almost no scarring of the case. Link.
Say goodbye to the bank-breaking audio/video cables at your local electronics superstore. Save your money and build out your home theater DIY style. With a total running time of 45 minutes, Kevin and Dan talk to a broadcast engineer to demonstrate how to make your own high end A/V cables for a fraction of the cost and a “monster” savings. Link.
