Prusaโs Multi Material upgrade for the i3 MK2/s printer brings 4-color printing without compromising the single color printing quality and workflow. Smooth Transitions You donโt have to commit to a particular extruder when slicing, which makes switching between colors as simple as selecting the appropriate extruder number in software. But be prepared: Multimaterial printing is […]
With the Printrbot Simple Pro, Brook Drumm and team are trying to deliver what he believes is his easiest to use machine yet. While we didnโt have a totally smooth experience with it, you will find the machine quality that one expects from Printrbot, and a whole new way of printing to go alongside the […]
Iโve seen a lot of high-performing, sub-$1,000 printers on the market, but what sets apart $2,000 machines โ like the Felix 3.1 โ is robust construction. Solid Structure Linear rails add stability. I wouldnโt think twice about running this machine at higher speeds. The high-temp, direct drive extruders are also suitable for materials beyond PLA […]
The Ultimaker 3 retains the precise, reliable prints of its predecessors, while adding dual extrusion, Wi-Fi/LAN, and active bed leveling. Since Ultimaker is firmly established, thereโs a wealth of information and support available. What’s New The dual extruders are a welcome addition. One application is to use the AA nozzle to extrude PLA for the […]
SeeMeCNCโs Hacker H2 kit isnโt for the faint of heart, but it will satisfy users who like getting their hands dirty customizing their printer. Open Arms The kit ships with two different length sets of delta arms: Orion (178mm) and Rostock (290mm). By swapping the arms, you can get either taller or wider prints. A […]
While the Felix Pro 2 is more expensive than many, it comes with lots of features to make printing faster, more accurate, and more pleasant. Mind the Gaps The easy to run, four-point auto-leveling system makes sure the new bed is calibrated and ready to go. Prints were generally good but issues with temporary extruder […]
The CraftBot XL is a good plug-and-play solution. The printing quality was great and the prints were fairly quick. Material Options The XL comes equipped with a .04 nozzle with a max resolution of 100 microns. The XL uses the companyโs CraftWare slicing software, and slicing files was easy and straightforward. The XL can handle […]
