If you’re a maker, 3d printing is an incredibly useful tool to have in your arsenal. Not only can it help bring your projects to life faster, but it can also offer unique results that would be difficult (or impossible!) to achieve with traditional methods. In these blog posts, we’ll provide you with some essential information and tips regarding 3D printing for makers—including the basics of how to get started, plus creative tutorials for spicing up your projects. Whether you’re already familiar with 3d printing or are just starting out, these resources will help take your game-making skills even further!
Chris from The New Hobbyist has a black desk but a white grommet for cables to run through, so he decided to model and print a new one with black plastic on his MakerBot. (It’s shown above installed in a white surface for illustrative purposes; it blended in too well with his black desk.) He […]
Do you ever wish you could take your CAD drawings with you wherever you went? With the release of AutoCAD WS for Android, your chances of accomplishing this feat have increased dramatically as Autodesk brings this mobile version of their venerable CAD software in sync with the iOS version.
Using projected light from four different directions, an app called Trimensional, from Georgia Tech researcher Grant Schindler, will assemble a 3D scan using an iPhone 4’s built-in camera. Once you’ve captured a desirable visage you can optionally memorialize said countenance by outputting a watertight file and sending it to your favorite 3D printer.
If you’d like to try your hand at turning on a lathe, but don’t want to shell out for a machine, how about printing your own EZLathe? Paul writes:
So I’ve built a complete mini lathe system I’m calling the EZLathe… Fully 3D Printable except a small motor, and a couple pieces of cheap electronics. And able to do small wood turning jobs, or small pieces of pretty much anything.
Add a few stepper motors and a controller, and before you know it you’ve got a nifty little cnc lathe.
The new curtain at the Oslo Opera House was commissioned from LA-based artist Pae White. It was reportedly created using a CNC loom weaving three different kinds of fabric to render a raster image of a scanned piece of crumpled aluminum foil. [via CRAFT]
Recently, we’ve been messing about with motors and gears at Pemtech. Students in one of my classes are building an underwater ROV, and we don’t have any decent propellers. Rather than shop for them, we’re fabbing our own with the laser cutter and Makerbot. Earlier this week, Jett worked out the proper dimensions to fit a plate to a motor shaft. He did this by measuring out a range of holes and then cutting them in quarter inch acrlyic. Once they came out of the laser, he tried pushing the motor into each of the holes until he found the ‘goldilocks fit.’ Once we had a plate, he used the same process to cut a series of holes in the plate that could be threaded with M3 screws. This setup allows us to attach anything to a motor.
Last night I was out on an adventure. In the morning, the shower curtain fell down because the pole was a bit too short. After I pulled the paper towel tube shim out, I tried to twist the rod to lengthen it. Since it was maxed out, it needed a little something special to help make ends meet.
When I went downstairs, I took a few extra steps out to the car, got the Makerbot and returned to fire up the computer with Sketchup. It took two iterations to get the dimensions right. The new part came out sized to fit over the end of the curtain rod and take up a bit of the gap.
