Dan writes “Build the ultimate garage door monitor, if you like home automation, you will definitely like this. This How-To shows how to monitor the exact position of the garage door, and display its status in your touchscreen interface (in this case, Main Lobby). A lot of details, but easy to understand.”Link.
Claude writes “My newyear present for all makers: Industrial Design DIY chess pieces out of nuts and bolts, brass and steel. I had seen a picture of similar chess figures in a book about chess, so i decided to build my own using commonly found 8mm nuts, bolt and other metallic pieces, some glue (to fix parts to base, which is a 14mm nut)”. Link.
“Mark McKeown loved the classic RCA Theremin so much that he built one to spec from scratch, down to the vintage power supply, coils, and cabinet. With authentic tubes and other details, this near-perfect replica can reproduce the instrument’s sound far better than a cheap kit. Mark includes links to resources for specs and supplies if you want to try it yourself.” [via] Link.
MAKE photo pool member Shufflehacks writes “I built my own radio-transmitter for my Shuffle, I nicknamed it “iMouse”. It works quite easy, there is a power switch on the bottom to turn it on. Just press play on the Shuffle and tune your radio to the right frequency. The range is about 100 to 150 meters.(500 feet) Now I can enjoy my Shuffle on my car stereo.” Link. It’s made out of an old mouse, excellent.
“Oww is a software project, to communicate with the Dallas 1-wire weather station and other 1-wire sensors, presenting live weather readings, logging data to file, uploading data to weather Web sites, and sending data to other programs through a command line interface.” Thanks Jason! Link.
Pastelero has a great use for an old scanner lamp, use it inside a PC! “I had a broken scanner around here, so I decided to do something with it. I decided to install the lamp inside my computer. And it worked!!! So I’ll try to explain what I did to make it work. I believe it’s different for different scanners, but you can try to figure out for yours!” Thanks Star! Link.
Nice Instructable from Maxwell – “An easy DIY project to add ground effects lights to your bicycle or other means of conveyance, utilizing inexpesive and commonly available cold-cathode lights. They look cool, and really do increase your visibility at night. Since putting them on my tallbike everone is asking to take my picture.” Link.
