Turn your optical mouse in to a scanner! Erik writes: “A Maker posted his project on a very large Dutch forum, after he read some datasheets of the sensor in his optical mouse. He wrote a application in VB for reading the sensors outputs, so he can use the sensor like a hand scanner. The software is available on the site and works on mice which use an ADNS-2610 optical sensor, recognisable by the eight pins, the sun-like mark and the text ‘A2610’.” Link.
Peter writes “Here’s a Haile, a robotic drummer that responds intelligently to your playing with an expressive performance on a Native American Pow-wow drum. They’re set to create a Jewish-Arab drum circle composition featuring the robot commissioned for performance in Jerusalem.” Here’s how they did it. Link.
Paul writes “If you’re anything like me, you just spent your last bit of cash on a wicked gaming mouse and didn’t leave any money for a mouse pad. Typically you would just game without one, but over time those teflon feet on your mouse will fill with gunk, get scratched up and your mouse won’t glide as smoothly as it did in its infancy. Enter the waxpaper mouse pad. For the cost of pretty much nothing, you can have the smoothest gliding mouse/mouse pad combo known to man. Let’s begin the fabrication…” Link.
Snowmobile fuel gauges are hard to read in the dark. Glen adds a green LED to his Arctic Cat Firecat to illuminate the mechanical gauge at night. “The Arctic Cat Firecats have a simple mechanical fuel level gauge mounting in the top of the fuel tank. The problem is that when you are driving around at night, there is no illumination on the gauge so it can’t be seen. After nearly running out of fuel one night, I decided I needed to come up with something better than carrying a flashlight in my pocket to check the fuel level.” Thanks Glen! Link.
Here’s a fairly old how to, but a good one that could be handy for new projects. If you have a Cisco Aironet card, or want to score a cheap one on eBay to hack up to add an external antenna here’s how. Link.
Badger writes “This holiday season my lovely lady wife asked me what I wanted for Christmas. Since my hobby is hard to buy for, we often have these conversations. One of the things I had mentioned was a 8″ Slow Speed Grinder I had seen at Woodcraft (on sale no less) for sharpening lathe chisels. Something I haven’t really mastered the art of yet, but it’s hard to get good results on 80 grit 6″ grinder wheel.” Here’s how he made a lathe tool sharpening jig…Link.
Simon made a simple iPod dock for his iPod nano using all the parts it came with. On the Flickr photo set he posted it shows making a hole in the desk, modding the connector cable and securing it flush on the desk. I go through too many devices to settle on one music player, but boy, this would make the desk less cluttered. Link.
