Month: August 2005

Extending the iTrip’s Range (Round 2)

Extending the iTrip’s Range (Round 2)

Itriphackround2 With the application of a knife along the seam on the side and top of the device, the use of tweezers to hold the newly-formed gap open, the use of another pair of tweezers to reach in and grab the antenna, and the replacing of the rubber insulating plug on the side of the iTrip to seal the casing back up, I was able to fully extend the antenna out the side of the iTrip at a healthy 90º angle with almost no scarring of the case. Link.

DIY High Quality A/V Cables

Screenshot Say goodbye to the bank-breaking audio/video cables at your local electronics superstore. Save your money and build out your home theater DIY style. With a total running time of 45 minutes, Kevin and Dan talk to a broadcast engineer to demonstrate how to make your own high end A/V cables for a fraction of the cost and a “monster” savings. Link.

Goodweld and Badweld

Goodweld and Badweld

Jalopywelding In MAKE 03 we have a great welding primer- If you need metal stuck together, there is no quicker path than buying a portable 110-volt wire-feed welder. Mr. Jalopy’s introduction to welding will help you understand the process and show how you can be a welder by the end of the weekend–and end up with a couple of jigs for the effort. Link. And now you can share your welds with the goodweld / badweld tags on Flickr!

DIY Underwater ROV Project

DIY Underwater ROV Project

056 Dan Corkery writes “Being the geeks that we are, we always come up with some sort of project to bring up to the lake and play with. This year, two weeks before vacation, we decided to build an Underwater ROV. For those not familiar, an ROV is a Remotely Operated Vehicle. Generally “real” ROVs cost anywhere from $8,000 up to Millions of dollars. We had two weeks and a $100 budget. Usually they have high-resolution camera systems and high powered thrusters to maneuver. We had two weeks and a $100 budget. However, the results were pretty good”. Link.