The National Needle Arts Association (TNNA) is proud to announce a new program – Stitch N’ Pitch! Building on the success at the Seattle Mariners last year, the Stitch N’ Pitch event has been structured into a formal program. Partnering with individual baseball clubs, TNNA is helping to bring two American traditions together — Baseball […]
Mypk8 posted up this great modded bicycle – “Created from an old Schwinn tandem – I think it was a Varsity. I cut it up and added a drafting table leg for the down tube. Then filled the holes in with bondo to give it a spine sort of look. I used the triple trees […]
Mark made a two person “tandem” bicycle using nothing but two dead ordinary bikes, two sticks and a roll of duct tape! – Link.
Monopole writes “This is a telescope constructed from the combination of a Russian “Tourist-FL” eyepiece which accepts M42 (a.k.a. Pentax/Universal) manual screw mount lenses a 2x teleconverter and a Russian Lytkarino 3M-5CA 8/500(f/8 500mm)Maksutov Catadioptric Lens.. I constructed it for less than $100 using surplus and parts obtained over eBay. The resulting telescope has an […]
Rick writes “Here’s part #2 of the CNC Router Project, covering the Gantry assembly and mountng the rail system.” – Link. Previous: Part 1 – CNC router project – Link.
Howtern writes “Looking for a good waterfight? Water hose too short? Soak those pesky neighbors or water the plants on the far side of the yard with this 3-part water-weenie!” – Link.
Simple Simon writes “Simple but possibly useful to someone – I needed to switch on some devices whenever my PC was on so I use the 5VDC fed from the USB ports to turn on a relay.” – Link.
