Fun & Games

At MAKE Labs we built a squadron of balsa-and-tissue ornithopters for William Gurstelle’s how-to article in MAKE Volume 08. The trickiest part was bending the tiny wire crank that flaps the wings in time. Even with Bill’s clear instructions, that little wire was trial-and-error. This kit spares you that error. The pre-bent crank and laser-cut […]

This starter kit has been the standard introduction to high-power rocketry (motor types H and above) for 20 years, and for good reason. The Initiator rocket is big (39″), looks sharp, and can handle a wide variety of motors with its 29mm reloadable motor casing. You can put the kit together in an evening with 5-minute […]

These three great starter kits for making small tabletop siege weapons pack quite a kick. They’re simple to build, and include well-documented, easy-to-follow instructions. All components are made of quality materials accurately machined and drilled. The Ballista kit (pictured) is built of laser-cut hardwood and is a real blast to assemble and fire. It’s a bit more difficult […]

This is a fantastic introductory electronics kit that comes with your choice of large red or green LEDs and everything else needed (aside from a soldering iron, solder, and flush cutters) to make one electronic 6-sided die. (The manufacturer says: “The name Dice Kit sounds a great deal better than ‘Die Kit’, so we bent […]