Silicon fish swim via electrostatic actuators
Over on Make: Japan, Takumi Funada found this neat electronic fish.
Making a robot can be an incredibly rewarding experience. It’s the perfect combination of creativity, engineering and problem solving. However, if you’re just getting started in robotics, it can also be overwhelming. To make things easier for those who are just starting out, we’ve put together some tips and tricks to help makers bring robots to life! From the basics of assembling your robot to software implementation, these pointers will give you everything you need to get started on your robotic adventure!
Over on Make: Japan, Takumi Funada found this neat electronic fish.
Before you reach for your incredulous hat, however, understand that the “passages” in question are really more like pipes. Approximately 20 cm square and winding upwards through the massive stone structure along a series of sharp corners, the two shafts in question connect to the so-called “Queen’s Chamber” in the middle of the pyramid, and were hidden until the late 19th century when a British explorer, reasoning by analogy to the two well-known shafts in the upper “King’s Chamber,” dug into the walls and discovered them. Unlike the shafts in the King’s Chamber, however, the Queen’s Chamber shafts do not connect to the outside of the pyramid. Starting in 1992, a series of ROVs have discovered that their distant ends are sealed by limestone “doors” incorporating copper fittings probably used as pulls. The implication seems to be that the shafts were sealed by the original builders by pulling the “doors” into place, from inside the Queen’s Chamber, using lines run down the shafts. Which raises some intriguing questions about what might be behind them.
So you want to get mobile with your Arduino, or other micro controller, and you aren’t sure where to start? The Maker Shed has 2 different platforms to get you started.
TEDxNASA speaker and Virginia Tech professor Dennis Hong describes the robots that he and his students are working on. [Via Fay]
ScanCam is a Norwegian semi-autonomous quadrotor drone that lives in a little mailbox-like home to keep it from the harsh elements and to recharge it. Botjunkie: The quadrotors can launch, recover, and recharge themselves at their huts (or “hangars” I guess), and when it snows (which I hear it doesn’t do once or twice a […]
Let’s Make Robotics user robodevil built these good-looking Homemade tracks for their robot, using some extra bike chain and a piece of plastic pipe.