Skip to content
221 - 240 of 1626 results
03/26/2010
Portuguese Thingiverse user Gonçalo Azevedo created a lampshade called Strømg Lump Leaks: The used technique is self supporting interlocking of...
02/22/2010
One of the cool things about Makers Market is that each seller gets a blog where they can talk about...
02/18/2010
So I don't want to go too far down the "funny warning signs" rabbit hole (you could get a whole...
01/26/2010
Freya’s Cabin is constructed from CNC-cut plywood layers pressed together, with each layer having a cutout shape like a stage...
01/25/2010
Nick Santillan wrote in to share his collapsible wooden 3-axis CNC machine. He decided to make the machine portable because...
12/28/2009
Pedro Mealha was inspired by those 3D plywood dinosaur kits when he designed this lamp, called rhizome, the armature of...
12/16/2009
My first print! OK, this really isn’t my first print, it’s actually my second print. Not bad, huh? My first...
12/16/2009
Lets jump right in here. We’re getting close to the end! Start by attaching the motherboard and stepper driver boards...
12/16/2009
Building the Plastruder isn’t too difficult, but it does take about two hours. I’m highlighting the general build process. You...
12/16/2009
Next up, is building and installing the Z stage. This is one of the easiest parts of the build. Start...
12/16/2009
It’s been a while since I last posted about my CupCake CNC build. OK, it’s been a really long time!...
12/16/2009
Wow, the holidays (and their aftermath) can really put the brakes on project building! But they're over, and it's time...
12/16/2009
Now it's time to build the Y-stage. This only takes about 30 minutes and goes together fairly easily. One thing...
12/16/2009
It's finally time to build the enclosure! All the parts have been sitting there, patiently waiting for me to unpack...
11/16/2009
Artists Chris Reilly and Taylor Hokanson appear to be getting some impressive results from their DIYLILCNC. They certainly aren't the...
11/09/2009
It's been a while since my last build entry, mostly because the finish takes a few days to apply, and...
11/09/2009
I planned on writing an entry about burning bootloaders & updating the firmware, but I just realized my kit comes...
11/07/2009
OK, let's get started with the CupCake Electronics Assembly. I ordered the Deluxe kit from batch #8, so most of...
11/06/2009
It's time to unbox the Cupcake CNC and see what's inside.
11/04/2009
Making of the Cupcake CNC from MakerBot Industries
221 - 240 of 1626 results
Cookie Settings
