Every other week, MAKE’s awesome interns tell about the projects they’re building in the Make: Labs, the trouble they’ve gotten into, and what they’ll make next. By Meara O’Reilly, projects intern I’d been wanting to make a Chladni plate for years, and testing out Edwin Wise’s Chladni plate project for MAKE, Volume 16, was just […]
Every other week, MAKE’s awesome interns tell about the projects they’re building in the Make: Labs, the trouble they’ve gotten into, and what they’ll make next. By Kris Magri, engineering intern One of my favorite tools here at Make: Labs is the plastic bender. The coolest thing about it is using the variac, a giant […]
I’m a great admirer of Jørgen Møller’s Posterhänger design. It’s great for those in-between prints that are too valuable to put thumbtacks through, but not valuable enough to have framed. Plus it’s considerably cheaper than framing, and looks a lot better than thumbtacks. And it’s easier on your walls, requiring only a single hole to […]
Most cell phones are provided with a very basic wall-wart charger, and you usually have to pay extra for a proper charging dock. The bundled charger is often unsightly in use, being just a transformer with a cord strung out to an end table or something where the cell phone rests. If you have a […]
By Alden Hart The “LED Light Brick” project in MAKE, Volume 18 has generated lots of good feedback for us, so we went back and asked Alden to explore a few variations on the theme of the brick casting itself, how you might be creative with it. This article is the result. Be sure to […]
My Dad got a shiny new red tractor the week before Father’s Day, which created a great opportunity for an easy, inexpensive, handmade gift: I bought a classic little red toolbox, to match the tractor, and fitted it with eight 3/4″ ring supermagnets on the bottom to make it stick to the fender. There’s a […]
The PING))) ultrasonic sensor is a really easy way to measure distance with a micro-controller. All you have to do is hook up 3 wires and upload some code. These sensors are great for robots, alarm systems, or any other application that requires some type of measurement or obstacle avoidance. Don’t forget to check out […]
