Blog

The Nilno Laser Fab

The Nilno Laser Fab

Smouldering-Dog writes – “This is from my site. It describes construction of a simple microcontroller circuit that has user I/O, two seven segment LEDs, a buzzer and A/D converter. It was originally made to drive a CO2 laser but the new firmware can be installed on the microcontroller to program the board to perform other […]

The GarageMahal

The GarageMahal

Bill Gurstelle from The Technology Underground Blog outlines the perfect Maker workshop – “In an earlier post, I brought up the idea of “the perfect home workshop.” or as one clever person put it, “the GarageMahal.” I believe that almost anything I could think of could be build in a shop like that.” Link. Also, […]

Homemade g-meter…

Homemade g-meter…

Homemade g force meter, Jesper writes – “This is a fun project. Unfortunately, it takes some time to develop the code, so this is a work in progress and here i’ll just present the project so far. Basically the AccelR8 is a device for measuring acceleration. It can measure +/- 2 g. As it contains […]

HOW TO – Make an axe

HOW TO – Make an axe

Clarke writes – “The druidical science of axemanship is not dead. Wielding an axe expertly is more than meets the eye. Can you properly ‘hang’ an axe? Are you able to detect hidden flaws when choosing a new axe handle? Bernie Weisgerger is a historic preservation specialist for the U.S. Department of Agriculture Forest Service. […]