Robotics

Making a robot can be an incredibly rewarding experience. It’s the perfect combination of creativity, engineering and problem solving. However, if you’re just getting started in robotics, it can also be overwhelming. To make things easier for those who are just starting out, we’ve put together some tips and tricks to help makers bring robots to life! From the basics of assembling your robot to software implementation, these pointers will give you everything you need to get started on your robotic adventure!

ROV to penetrate ancient “door” in Great Pyramid

ROV to penetrate ancient “door” in Great Pyramid

Before you reach for your incredulous hat, however, understand that the “passages” in question are really more like pipes. Approximately 20 cm square and winding upwards through the massive stone structure along a series of sharp corners, the two shafts in question connect to the so-called “Queen’s Chamber” in the middle of the pyramid, and were hidden until the late 19th century when a British explorer, reasoning by analogy to the two well-known shafts in the upper “King’s Chamber,” dug into the walls and discovered them. Unlike the shafts in the King’s Chamber, however, the Queen’s Chamber shafts do not connect to the outside of the pyramid. Starting in 1992, a series of ROVs have discovered that their distant ends are sealed by limestone “doors” incorporating copper fittings probably used as pulls. The implication seems to be that the shafts were sealed by the original builders by pulling the “doors” into place, from inside the Queen’s Chamber, using lines run down the shafts. Which raises some intriguing questions about what might be behind them.

Telerobotic Rock ‘Em Sock ‘Em Robots

Just when you thought Rock ‘Em Sock ‘Em Robots couldn’t get any cooler, makers Zachery Shivers and Anne Flinchbaugh go ahead and add a bunch of servos, a custom controller board, and some fancy sensor-laden wireless watches from TI to allow you to control your robot remotely. As an entry to the Texas Instruments Co-op Design Challenge, the souped-up game uses sensor readings from a pair of Chronos watches worn by each opponent to control their respective robot.