Making a robot can be an incredibly rewarding experience. It’s the perfect combination of creativity, engineering and problem solving. However, if you’re just getting started in robotics, it can also be overwhelming. To make things easier for those who are just starting out, we’ve put together some tips and tricks to help makers bring robots to life! From the basics of assembling your robot to software implementation, these pointers will give you everything you need to get started on your robotic adventure!
This is just the beginning of a much more powerful and intelligent robot. The R/C car is powered by an Arduino and a custom made motor controller. This looks like a really good platform for further development. It has power, speed and plenty of room for more electronics. For now it´s just remote controlled, soon […]
Amazing shape-shifter robotic system being developed at University of Pennsylvania that can locate its subsystem clusters and reassemble itself after being kicked or otherwise disrupted. Shape-shifting robots take form [via Boing Boing]
Bre writes – I recently met Greg Marra at ROFLthing. He is doing awesome work at Olin College. I found this sweet video of a stingray automaton that he and his team made in a rapid prototyping class. I asked him some questions about how it works, he got back to me and brought me […]
eklux writes – This video shows a self oscillating ball pendulum, that feeds a ten counter balance. If I’ve had enough time, Meccano and balls, the idea was to built a complete clock, with a set of sequential balances, that together would display the current time. Also, it would have been nice to fall a […]
This is the i-Shovel, a prototype of an autonomous snow shovel. It is meant to be left outside, waiting for snowfall. When it detects one inch of snow, it goes to work shoveling the driveway. I would have loved this as a kid! Follow the link for more info.
This week I am going to show you how to get up and running with the 3pi by Pololu. I will be going through all the steps needed to upload the line following program that is included from Pololu. Getting started with the 3pi isn’t too difficult, but there are a few applications and drivers […]
By way of BotJunkie comes this robot vacuum, the Dustbot, sold by Tomy in 1985. I’d never even heard of it. The broom and dustpan is not, apparently, how it does its job. That’s just for a little light entertainment while it attempts a little light vacuuming. Tomy Vacuuming Dustbot Had Edge Sensors In 1985
