As the preeminent tool for makers, Arduino is a versatile platform that covers almost every type of creative making. With its simple-to-use coding language and fun programming concepts, Arduino enables users to create modern electronics with ease. From beginner level projects like flashing LED lights to more advanced builds such as interactive robots, there are an endless number of possibilities when it comes to building projects with Arduino. Whether you are new or an experienced builder in search of fresh ideas, these posts will provide interesting Arduino tutorials and unique ideas that may spark your creativity and motivate you take on any type of maker project!
In front of the DRO is an array of lenses that allow for defocusing of the digits as they are shifted by the motor. This creates an unusual effect that can be implemented as desired in the programing. At this time the effect is randomized over the course of a single minute. The electronics clock is a real-time clock w/ battery so that when power is lost the time is retained.
Here’s how to make a little pedal for electric guitar. The idea is to connect the Arduino pedals, and using software to control sound processing, we made ourselves with Pure Data. Here I show you an example of a looper, but it can also be a rack of effects without problem.
Here’s a super-nerdy timepiece created using Arduino, a DS1307 real-time clock chip, four 74HC595 shift registers, and an 8×8 RGB dot matrix display. How does it tell time? The time is indicated using blocks of colour. The central 6×6 grid is split into 4 x (3×3) grids and each 3×3 block is a different colour. […]
Have you ever wanted more pins available on your Arduino? Well if you have, check out this nice write up about using an I/O Expander with an Arduino.
From the MAKE Flickr pool For the first assignment of his Intro to Physical Computing class, Greg rigged up a couple of conductive matchbox cars to act as a switch – lighting their moment of impact. Read more over at Ideas for Dozens.
Pete’s lawn sprinkler was covering too much unnecessary ground (pavement) so he designed a method for regulating the water supply based on the sprinkler’s position – I’m using a similar setup to the rudder control on my model airplane. The cable gets pulled in and out as the sprinkler turns (kind of like a rudder). […]
This JeeNode wireless communication platform looks like a fun and cost effective way to get into experimenting with RF communication.
