CEB Shaker Mount
Sketchup Model
torch
CEB Support System
This guide explains the steps for: Leg Holders-Model Feet- Model Legs- Model Secondary Arms- Model Primary Arms- Left Primary Arm Model, Right Primary Arm Model Additional Materials Required: 3/4″ Steel Nuts (14) 3/4″x1.5″ Bolts (14)
CEB Hopper Supports and Grate Supports
Hopper Support Model Grate Support Model Additional Materials Required: 3/4″x1.5″ Bolts (2) 3/4″ Nuts (2) Shaker Mount
Prepare the Hopper Sheet Metal
Sketchup Model Additional Materials Required: Hinges (12) 1/2″x1″ Bolts (12) 1/2″ Nuts (12) 1/2″ Washers (12)
CEB Soil Grate
Sketchup Model Additional Materials Required: Steel Nuts (2)
CEB: Wide Cylinder Supports
Sketchup Model Additional Materials Required: 3/4″x2″ Bolts (2) 3/4″ Steel Nuts (2) 3/4″ Galvanized Nuts (2)
CEB Main Frame: U-Channel Prep
Sketchup Model Additional Materials Required: 3/4″ Galvanized Nuts (4) 3/4″ Steel Nuts (10)
