HOW TO build a nice poker table
For all you Poker playing Makers out there – here’s how to build a pretty nice poker table. Lots of photos and instructions – all using a 4 x 8 sheet of Fiber Board. Link.
Blog
Homemade Simple Cardboard Variable Capacitor
The “Cardboard” Variable Capacitor as built in this article will yield a cap in the range of about 300 pF Max. Increasing it to 7″ will get well up to 370 pF. It is build of readily available material found around the house (some at the hardware store).Link
Virtual touring with Google Earth…
Take a virtual tour around Seattle using Google Earth and stop by to see some videos from our archive. GeoVlogging is the process associating a geographic location to a video blog post. In our first virtual voyage, you’ll be able to watch time pass over Lake Union and share in some of our Seattle experiences. [via] Link. Also, looks like a new version is out.
HOW TO strip down your computer for playing games
Turn that old Win machine in to a gamer box – This article describes how to use a clean boot to start your Microsoft Windows XP, Microsoft Windows Millennium Edition (Me), or Microsoft Windows 98-based computer. When you use a clean boot to start your computer, Microsoft Windows loads only basic devices and services when it starts. [via] Link.
Review of the Gameboy Micro
I can’t wait to get one and start hacking, a super tiny ebook reader is my first project – You already know that the Game Boy Micro is small when you hear people tell you that it’s just barely bigger than the cartridge that fits into it, but you don’t really get a sense for just how small it is until you get your hands on it. Your thumb just about dwarfs it. The AC adapter for the system is nearly as big as the system it charges — the charger is slightly thicker, almost exactly as tall, and a little more than half as wide. The whole system is smaller than just the screen on Sony’s PSP. It almost fits inside a Nintendo DS game case. We’re talking very, very small. Link.
DIY Photography on the cheap
$77, not bad – Who this is for: You: owner of a small design company, a seat-of-your-pants freelancer, or perhaps an under-appreciated intern in the marketing staff of a big corporation. You wish to improve what you can offer photographically for your projects, you might only own a mid-range consumer digital camera. Read on, this article is intended as a helpful starting point. Link.
Maker challenge: Wiring a House
Here’s a good tip from the comments on our Maker challenge: Wiring a House – I’m an architect, AND I recently renovated my own house from bare studs on up. I’m with the guy who said to run conduit. It’s called ENT (Electrical Nonmetallic Tubing), some contractors call it Smurf Tube, cause it’s usually blue. You run it from junction juntion box to box inside the walls and cover the standard boxes with a standard wall plate. You can then run any type of wire in them in the future and you can run the wire anywhere in the system by skipping from box to box. Even if you run structured cable, run it in smurf. Link.