HOW TO make fake a Ferrari out of an Acura NSX
A series of photos (many photos) showing how to create a fake Ferrari out of an Acura NSX. The seem to have used a tiny toy car as the model for the whole project, excellent. Link.
Extending the iTrip’s Range (Round 2)
With the application of a knife along the seam on the side and top of the device, the use of tweezers to hold the newly-formed gap open, the use of another pair of tweezers to reach in and grab the antenna, and the replacing of the rubber insulating plug on the side of the iTrip to seal the casing back up, I was able to fully extend the antenna out the side of the iTrip at a healthy 90º angle with almost no scarring of the case. Link.
DIY High Quality A/V Cables
Say goodbye to the bank-breaking audio/video cables at your local electronics superstore. Save your money and build out your home theater DIY style. With a total running time of 45 minutes, Kevin and Dan talk to a broadcast engineer to demonstrate how to make your own high end A/V cables for a fraction of the cost and a “monster” savings. Link.
Inject audio over Bluetooth with the Car Whisperer
This new toool is called The Car Whisperer and allows people equipped with a Linux Laptop and a directional antenna to inject audio to, and record audio from bypassing cars that have an unconnected Bluetooth handsfree unit running. Since many manufacturers use a standard passkey which often is the only authentication that is needed to connect. [via] Link.
Goodweld and Badweld
In MAKE 03 we have a great welding primer- If you need metal stuck together, there is no quicker path than buying a portable 110-volt wire-feed welder. Mr. Jalopy’s introduction to welding will help you understand the process and show how you can be a welder by the end of the weekend–and end up with a couple of jigs for the effort. Link. And now you can share your welds with the goodweld / badweld tags on Flickr!
Gizmodo IMterview: Jonathon Keats – Pinhole camera
Nice interview on Gizmodo…Artist Jonathon Keats is taking one long photo. His project, a pinhole camera that is taking one continuous picture of a room in the Hotel des Arts in San Francisco, is a mixture of uber-low-tech and ultra-high concept geekiness. Link.
The ability to climb and descend stairs is one of the unexpected behaviors of this new home-brew off-road autonomous robot platform. The robot has a custom chassis and uses standard suspension and drive components scavanged from old R/C monster trucks. [