Complete PC/Gameboy live rig in a toolbox
Everything is contained in a standard, run of the mill, metal toolbox. The bottom drawer contains a working computer with a VIA EPIA V motherboard & cpu, memory, hard drive, cd rom drive, fans, power supply, and cables. The middle drawer contains a usb audio interface, roll-up keyboard, mouse, and a Gameboy running Sludgeon2. The top contains a midi controller, power cables, surge protector, and a crappy lcd screen mounted to the bottom of the lid. Holes were drilled so that the power cables in the top could be connected to their respective devices in the middle and bottom drawers and would not impede the opening and closing of these drawers. [via] Link.
Noah Vawter (part of the team behind the the Chiclet DSP Music Box, and loads of other cool stuff) and Nathan Wray have developed PSPKick, a sample-based drum machine for the PSP. Looks like a 12 track xoxox inteface, and can output drum loops into wav files on the memory stick. Fun fun fun 
Using a grill to heat a pool. The device heats water 30 to 35 degrees at 3 to 4 gallons per minute flow. I find I get a 7 degree increase in my 8000 gallon pool for each 5 gallon tank of propane. Each tank will burn for about 13 to 15 hours on high. A pool cover is required. Thanks Sean! 
This is the raw material for my school bus conversion project it’s a 1989 Thomas Saf-T-Liner MVP with a rear mounted CAT 3208 engine. It was originally built for 75 Passengers with a GVWR 30,000 lbs. It’s got about 80K miles on it and originally came from Montrose, NY. The interior dimensions are 35′ x 7.5′ x 6.5′ Over the next several months I will be converting this old school bus into a family camper and documenting each step of the conversion process here. Thanks Jake! 
“Unfortunately, Verizon Wireless cripples their phones so that you have to use their fee-based service in order to add new ringtones, or to transfer the pictures you take with the camera. The Verizon logo conceals the date display on the main screen and covers over the top portion of the background, among various other corporate silliness. Selling a device that is intentionally crippled is just plain ridiculous. Of course, the only natural thing to do in a situation like this is to hack it.” [
These instructions are intended to make a cutter for expanded polystyrene foam sheets of 5cm thickness. The cutter is suitable for cutting wind turbine blade sections designed using the club cycom software. Only use to cut polystyrene foam since other materials (such as polyurethane foam) will give off toxic fumes. 
There are many situations where you might need a small amount of electricity: running gate openers, safety lights, water level indicators and other low-power devices, for example. This site shows how to make a simple Savonius wind turbine to power a gate opener. 
