This is the seventh of eight guides in a series documenting my build of MakerGear’s Mosaic desktop FDM/FFF 3D printer kit.
This is the sixth of eight guides in a series documenting my build of MakerGear’s Mosaic desktop FDM/FFF 3D printer kit.
From the book The Busy Girl’s Guide To Sewing by Carrie Maclennan Get ready to show off your basic drawing skills, your hand stitching skills and your machine sewing skills.
The kit can be purchased here: https://www.trossenrobotics.com/p/Turtle… It is a ready-to-build kit based upon the original TurtleBot Robot Arm found here: Build an Arm for Your TurtleBot This build guide assumes that you know how AX-12 brackets are mounted to AX-12 servos.
Crafting under pressure is irresistible.
The Lucien Yeomans “secret” that was almost lost.
Additional Materials Required: Thread tape Shaker motor Buy 1/2″ NPT Needle Valve (1) Buy 1/4″x12″ NPTM Hydraulic hose (1)Buy 1/2″x36″ NPTM Hydraulic hoses (2) SAE 4M to 1/4″ NPTF Swivel (1)Buy 1/2″ NPT Hex Nipple (2) Buy 1/2″ NPTF Tee (1) Buy 1/2″ NPTM to 1/4″ NPTF bushing Buy
This is the fifth of eight guides in a series documenting my build of MakerGear’s Mosaic desktop FDM/FFF 3D printer kit.
Sketchup Model Additional Materials Required: Roller Guides Soil Loading Drawer Wide Cylinder Supports Drawer Members 3/4″x2″ Bolts (16) 3/4″ Nuts (16) 3/4″ Washers (16) 1/2″ Washer (2) 1/2″ Lock Washer (2) 1/2″ Nut (2)
Sketchup Model Additional Materials Required: Thin Cylinder Supports Magnet Holder Sensor Holder Leg Holders (2) 3/4″ Galvanized Nuts (3)
Additional Materials Required: Soil Loading Drawer Wide Cylinder Supports 3/4″x2″ Bolts (8) 3/4″ Galvanized Nuts (8)
