Udijw writes – “This reflector panel holder made of 3/4″ PVC pipe is handy if you have a spare tripod to use. The tripod provides a stable base that can be adjust for height and tilt angle. Reflector is the collapseable type used for an auto windshield (31 x 38″). It may also be possible […]
Housekey writes – “To do this, all that is needed is a Polaroid Land camera, some small screwdrivers, and a small sheet of thin metal. These cameras can be found on eBay, or better yet, at yard sales. It will be made into a pinhole camera with several pinholes that can be switched into place, […]
Adrian writes – “A flexible lighting system is something that I have wanted to play with for a while, but like everything else in photography it seems to be a fairly expensive area to get into, at least when you consider the relative simplicity of a light-bulb. Thankfully there are a number of cheap and […]
Here’s a DIY imaging system that uses four different wavelengths from LEDs for detecting melanoma [via] – Link.
Bre writes – “I collect lenses out of cameras and put them on other stuff. I used gaffer tape to make my nokia 7610 have a fisheye.” Full photo set here – Link. If you get bored with your camera phone, this is a lot of fun.
MAKE Flickr photo pool member Scalleja writes – “If you want to have the next feature in your photos “Click here to see where this photo was taken” just follow the following steps: 1.- Go to BeeLoop’s Lat/Lon to Flickr’s geoTags page. 2.- Move the map to the desired location and copy the geotagged text […]
MAKE Flickr photo pool member Jyoseph has a “DIY RingLight for the home depot goers. You’ll need to be comfortable with basic hand tools and will probably need to work with a power saw and drill, unless you find a sufficient work around which is quite possible. Be ready to spend about $30-$40 and an […]
